Sharp BP-70C36 Color Advanced and Essentials BP Series Operating Manual - Page 927
Network Settings
![]() |
View all Sharp BP-70C36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 927 highlights
SETTING MODE►SYSTEM SETTINGS Network Settings Quick Settings Select the minimum required settings for the machine connection to the network. Wireless Settings When using BP-50C26/BP-50C31/BP-50C36/BP-50C45/BP-50C55/BP-50C65, it is displayed when the wireless connection adapter is installed. Connection Type Switch between [Wired Only], [Wired + wireless (access point)], [Wireless (Infrastructure Mode)] or [Wired+Wireless (Wi-Fi Direct Mode)] according to the network connection status. Factory default settings: Wired + wireless (access point) Keep Wireless Access Point activated This can be set only when "Connection Type" is "Wired+Wireless (Access Point Mode)". If enabled, the machine can normally use a wireless LAN network. If disabled, wireless LAN will be enabled when the NFC touchpoint area is touched on a mobile device or when the [Easy Connect Setup (QR code)] key is tapped on the home screen. When one of the conditions below occurs, the wireless LAN connection is automatically canceled. • When there is no connection to the access point for a certain period of time. Factory default settings: Disable When "Wireless (Infrastructure Mode)" is selected in "Connection Type" Access Point Search Click this to search access points. When the search results are displayed, select the access point to use and click [OK]. [SSID], [Security Type], and [Encry.] are automatically applied. SSID Enter the SSID. Security Type Select a security type. Factory default settings: No Sound Encry. Select an encryption type. Factory default settings: No Sound Security Key Enter a security key. Security Type Security Key None WEP WPA/WPA2-mixed Personal WPA/WPA2-mixed Enterprise WPA2 Personal WPA2 Enterprise WPA2/WPA3-mixed Personal WPA3 Personal WPA2/WPA3-mixed Enterprise WPA3 Enterprise WEP64bit: 5 characters or 10-digit hexadecimal number WEP128bit: 13 characters or 26-digit hexadecimal number WPA/WPA2/WPA3: 8 to 63 characters or 64-digit hexadecimal number 9-153
![](/manual_guide/products/sharp-bp50c26-color-advanced-essentials-bp-series-operating-manual-9e53f11/927.png)