Sharp BP-70C36 Color Advanced and Essentials BP Series Operating Manual - Page 304
Select the envelope size from the Paper, Size menu., Select [Paper Feed]., Select the [Bypass Tray
View all Sharp BP-70C36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 304 highlights
PRINTER►PRINTING IN A macOS ENVIRONMENT PRINTING ON ENVELOPES The bypass tray or tray 1 can be used for envelope printing. Select the envelope size in the settings of the application ("Page Setup" in many applications) and then perform the following steps. • For the types of paper that can be used in the tray, see "APPLICABLE PAPER TYPES (page 1-12)". • For the procedure for loading paper in the bypass tray, see "LOADING PAPER INTO THE BYPASS TRAY (page 1-22)". • For the procedure for loading envelope in the tray 1 , see "LOADING ENVELOPE IN TRAY 1 (page 1-17)". • For more information on the procedure for loading paper, see "SELECTING THE PAPER (page 4-15)". • When using media such as envelopes that can be loaded only in a specific orientation, you can rotate the image 180 degrees. For more information, see "ROTATING THE PRINT IMAGE 180 DEGREES (ROTATE 180 DEGREES) (page 4-38)". • After printing, there may be creases in the envelope depending on the envelope type and format as well as on the printing environment. Before high-quantity printing, it is recommended that you conduct a test print. 1 Select print settings. (1) Select the envelope size from the "Paper Size" menu. (2) Select [Paper Feed]. (1) (2) (3) Select the [Bypass Tray (Envelope)] or [Tray 1] from the "All Pages From" menu. (3) When [Enable Selected Paper Type in Bypass Tray] (enabled by factory default) is enabled in "Settings (administrator)", set the paper type of the bypass tray to [Envelope]. 4-16