Sharp BP-70C36 Color Advanced and Essentials BP Series Operating Manual - Page 26

BEFORE USING THE MACHINE►LOADING PAPER INSERTING TRANSPARENCY FILM • Use SHARP-recommended transparency film. • When loading multiple sheets of transparency film into the bypass tray, fan the sheets several times before loading. • When printing on transparency film, remove each sheet as it is printed and output from the machine. If multiple sheets of film are allowed to stack on the output tray, the sheets may stick together or become curled. Oriented horizontally Oriented vertically LOADING ENVELOPES When inserting envelopes in the bypass tray, place them aligned to the left side in the orientation shown below. Only the front side of envelopes can be printed or copied on. Place the front side facing down. Fold the flap and make a sharp crease at the fold. When printing the front side Place the front side facing down. When placing DL • Open the flap of the envelope. • Place so that the flap is on the right. When placing C4, C5, or C6 • Close the flap of the envelope. • Place so that the flap is on the back side. When printing the front side Flap Address printing Place the front side facing down. 1-23