Sharp BP-70C36 Color Advanced and Essentials BP Series Operating Manual - Page 842

SETTING MODE►SYSTEM SETTINGS Setting item Description Accordion Fold*9 Set how to open accordion fold. Factory default settings: Fold Orientation:Open Right Half Fold*9 Set the print surface and opening method for half fold. Factory default settings: Print Side:Inside Quick File (Enabled) (Disabled) *1 Paper sizes that can be used with this function are 11" x 17", 8-1/2" x 14", 8-1/2" x 11", A3, B4, and A4. (This function may not take effect with some print methods.) *2 Can be selected when 2-Up is selected. *3 Can be selected when 4-Up/8-Up is selected. *4 Only effective when printing PDF, JPEG, and TIFF files. *5 It can be used by connecting an inner finisher, finisher, or saddle finisher. *6 When the inner finisher or saddle finisher (large stacker) or finisher (large stacker) is installed. *7 When a punch module is installed. *8 When the saddle finisher or saddle finisher (large stacker) is installed. *9 When the folding unit is installed. PCL Settings This is used to set the symbol sets, fonts, and line feed code used in a PCL environment. Settings Setting item PCL Symbol Set Setting PCL Font Setting PCL Line Feed Code Wide A4 Settings Specify the symbol set used for printing. Factory default settings: PC-8 Select a font used for printing. Factory default settings: Internal Font: 0: Courier This setting is used to select how the printer responds when a line feed command is received. Factory default settings: 0.CR=CR; LF=LF; FF=FF When this is enabled, 80 characters per line are printed on the 8-1/2" x 11" (A4) size paper using a 10-pitch font. (When this setting is disabled, up to 78 characters are printed per line.) Factory default settings: Disable PostScript settings When an error occurs during PostScript printing, these settings determine whether or not an error notice is printed and whether or not the PostScript data is received in binary format. On the BP-50C26/BP-50C31/BP-50C36/BP-50C45/BP-50C55/BP-50C65, the PS3 expansion kit is required. Setting item Settings Screen Settings Print PS Errors Binary Processing Configure image settings for PostScript. Factory default settings: Standard When a PS (PostScript) error occurs during PostScript printing, this setting determines whether or not an error notice is printed. Factory default settings: Disable Receive PostScript data in binary format. Factory default settings: Disable 9-68