Sharp BP-70C36 Color Advanced and Essentials BP Series Operating Manual - Page 992
Multiple Originals Are Fed At The Same Time
View all Sharp BP-70C36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 992 highlights
TROUBLESHOOTING►GENERAL PROBLEMS THE DISPLAYED BYPASS TRAY PAPER SIZE IS NOT CORRECT Check Do the bypass tray guides match the width of the loaded paper? Solution ■ Set the bypass tray guides to the width of the paper. When loading paper in the bypass tray, be sure to pull out the extension guide to enable the paper size to be detected correctly. THE ORIGINAL MISFEEDS (AUTOMATIC DOCUMENT FEEDER) Check Solution Is too much paper loaded into the document feeder tray? Is the original a long original? Is the original on thin paper? Is the original on heavy paper? (BP-70C31/BP-70C36/BP-70C45/BP-70 C55/BP-70C65) Is the feed roller dirty? ■ Make sure that the stack of paper in the tray is not higher than the indicator line. AUTOMATIC DOCUMENT FEEDER (page 1-30) ■ When using the automatic document feeder to scan a long original, set the scan size to [Long Size]. (Note that long originals cannot be copied using the copy function.) ■ Use the document glass to scan the original. If you need to use the automatic document feeder, use [Slow Scan Mode] in [Others] to scan the original. ■ Use the document glass to scan the original. If you need to use the automatic document feeder, use [Heavy Paper Scan] in [Others] to scan the original. ■ Clean the surface of the paper feed roller. CLEANING THE PAPER FEED ROLLER (page 1-73) MULTIPLE ORIGINALS ARE FED AT THE SAME TIME AND CANNOT BE LOADED CORRECTLY (AUTOMATIC DOCUMENT FEEDER) Check Are your originals warped or folded? Are you using a pasted originals? Solution ■ Fix any warps or folds in the originals. Fan the originals well and load them in automatic document feeder. Align the edges of the original and set the original size. Depending on the condition of the original, the type of paper, and the temperature and humidity of the environment in which the machine is used, multiple sheets of paper may be fed at the same time and may not be loaded correctly, or the ejected originals may not be neatly aligned. It may be improved by the following settings. • For copying: Set the resolution to 600x600dpi • For scan transmission: use "Preview" AUTOMATIC DOCUMENT FEEDER (page 1-30) 10-9