Sharp BP-70C36 Color Advanced and Essentials BP Series Operating Manual - Page 930
Network Name Setting, Interface Settings
View all Sharp BP-70C36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 930 highlights
SETTING MODE►SYSTEM SETTINGS Change PIN Code/Password To change the password, set . Authentication Select the authentication server from the drop-down list. Factory default settings: Anonymous KDC Server Enter the IP address or host name of the Kerberos authentication server. Realm Enter the Kerberos realm. Enable SSL/TLS If is set, the SSL/TLS encryption communication is enabled. Connection Test Tap the [Execute] button to test the connection to the LDAP server. Network Name Setting Device Name Enter a device name. Domain Name Enter the domain name. Factory default settings: Sharp-Printer Comment Enter a comment. Interface Settings Mainly set items related to TCP/IP. Connection Type Switch between [Wired Only], [Wired + wireless (access point)], [Wireless (Infrastructure Mode)] or [Wired+Wireless (Wi-Fi Direct Mode)] according to the network connection status. Factory default settings: Wired + wireless (access point) Keep Wireless Access Point activated This can be set only when "Connection Type" is "Wired+Wireless (Access Point Mode)". If enabled, the machine can normally use a wireless LAN network. If disabled, wireless LAN will be enabled when the NFC touchpoint area is touched on a mobile device or when the [Easy Connect Setup (QR code)] key is tapped on the home screen. When one of the conditions below occurs, the wireless LAN connection is automatically canceled. • When there is no connection to the access point for a certain period of time. Factory default settings: Disable 9-156