Toshiba Tecra 8000 Tecra 8000 Users Guide - Page 158
DVD operating problems–Windows95/ Windows98
View all Toshiba Tecra 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
134 Troubleshooting Guide DVD operating problems-Windows 95/Windows 98 For Windows NT, make sure the Parallel Port Mode option in System Setup is set correctly for your printer. If your printer is not ECP-compatible, this option should be set to Std. Bi-Direct. If your printer is ECP- or IEEE 1284-compliant, make sure you have an IEEE 1284 printer cable. Run the printer's self test to check for any problem with the printer itself. Make sure you installed the proper printer drivers. You may have connected the printer while the computer was turned on. Disable Resume Mode (if appropriate), turn off the computer, and turn off the printer. Turn the printer back on, make sure it's ready (on line), then turn the computer back on. The printer doesn't print what I see on the screen. Many programs display information on the screen differently from the way they print it. See if your program has a print preview mode. This mode lets you see your work exactly as it will print. Contact the software manufacturer for more information. DVD operating problems-Windows 95/ Windows 98 If you experience a problem with your DVD Player, you may be able to fix the problem yourself. The following section describes some potential problems, and gives instructions for fixing them. General problems playing a DVD title may be resolved by the following steps: 1 Ensure that the drive is properly installed. It must be inserted completely. 2 Ensure that the DVD-ROM disk is properly inserted in the drive drawer. Part I: Getting to Know Your Computer