Xerox 6500V_N User Guide - Page 93

Admin Menu, Network Setup Menu

Page 93 highlights

Admin Menu Control Panel Menus The Admin Menu contains the following sub menus: • Network Setup Menu on page 93 • USB Setup Menu on page 94 • System Setup Menu on page 95 • Maintenance Mode Menu on page 97 • PCL Setup Menu on page 98 • PostScript Setup Menu on page 100 • Control Panel Menu on page 101 Use the Admin Menu to access the configuration settings of the printer. Network Setup Menu Use this menu to configure printer settings for jobs sent to the printer through a network port. Notes: • The settings in the Network Setup menu cannot be selected if you access this menu during printing. • Restart the printer to activate menu setting changes. After changing settings, turn off the printer, then turn it on again. Item Ethernet TCP/IP Description Specifies the Ethernet communication speed and modes. • Auto (default): Automatically changes between 10M Half Duplex, 10M Full Duplex, 100M Half Duplex, 100M Full Duplex, and 1000 Full Duplex. • 10Base Half • 10Base Full • 100Base Half • 100Base Full • 1000Base Full Specifies the settings to use for TCP/IP: • IP Mode: IPv4 Mode, IPv6 Mode, or Dual Stack • IPv4: Get IP Address, IP Address, Network Mask, Gateway Address • IPsec: IP security protocol; available when enabled Phaser 6500 Color Laser Printer 93 User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162

Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide
93
Admin Menu
The Admin Menu contains the following sub menus:
Network Setup Menu
on page 93
USB Setup Menu
on page 94
System Setup Menu
on page 95
Maintenance Mode Menu
on page 97
PCL Setup Menu
on page 98
PostScript Setup Menu
on page 100
Control Panel Menu
on page 101
Use the Admin Menu to access the configuration settings of the printer.
Network Setup Menu
Use this menu to configure printer settings for jobs sent to the printer through a network port.
Notes:
The settings in the Network Setup menu cannot be selected if you access this menu during
printing.
Restart the printer to activate menu setting changes. After changing settings, turn off the
printer, then turn it on again.
Item
Description
Ethernet
Specifies the Ethernet communication speed and modes.
Auto (default): Automatically changes between 10M Half Duplex, 10M
Full Duplex, 100M Half Duplex, 100M Full Duplex, and 1000 Full Duplex.
10Base Half
10Base Full
100Base Half
100Base Full
1000Base Full
TCP/IP
Specifies the settings to use for TCP/IP:
IP Mode: IPv4 Mode, IPv6 Mode, or Dual Stack
IPv4: Get IP Address, IP Address, Network Mask, Gateway Address
IPsec: IP security protocol; available when enabled