Xerox 6500V_N User Guide - Page 97
Maintenance Mode Menu, Use this menu to con color registration and to reset defaults.
View all Xerox 6500V_N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Control Panel Menus Item Odd Page 2-Sided (Phaser 6500DN printer configuration only) Power On Wizard Description If the optional duplex unit is installed, this item tells the printer how to handle the last odd page in a 2-sided print job. • 1-sided • 2-sided Resets the Power On Wizard. The first time the printer is turned on, a special menu appears on the printer control panel. Use it to configure initial settings such as language, default paper size, and network settings. This setting enables the administrator to reset the Power On Wizard so that the special menu appears when the printer is turned on. Maintenance Mode Menu Use this menu to configure color registration and to reset defaults. Item F/W Version Auto Regi Adj. Adjust Color Regi. Clear Developer Toner Refresh IU Refresh (Imaging Unit Refresh) Init Print Meter Initialize NVM Description Displays the current firmware version installed in the printer. Auto Registration Adjust. When On (the default), the color registration is adjusted automatically. Adjust Color Registration. Used to correct the color registration between colors. For details, see Color Registration on page 136. • Auto Adjust: Use to force an automatic color registration correction. • Color Regi Chart: Prints the color registration chart used to check for correct color registration. • Enter Number: Use to select and correct color registration numbers. • Fast Scan (1): For setting horizontal color registration, or Slow Scan (2) for setting vertical color registration. Resolves print-quality defects associated with charge problems after high-coverage print jobs. Resolves print-quality defects associated with charge problems after low-coverage jobs. Helps improve imaging unit operation by performing a density and color curve calibration. Initialize Print Meter. Resets the Print Meter. Resets the settings in the nonvolatile memory (NVM), except for the network settings, to their defaults. NVM is memory that stores the printer settings even after the power is turned off. After selecting this option and restarting the printer, all the menu settings are reset to their default values. Note: • You cannot execute the Initialize NVM setting during printing. • After changing this setting, turn off the printer and then turn it on again to activate the change. Phaser 6500 Color Laser Printer 97 User Guide