Xerox 6500V_N User Guide - Page 95
System Setup Menu
![]() |
View all Xerox 6500V_N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Control Panel Menus System Setup Menu Use this menu to configure the general operation settings of the printer. For example, time to energy saver mode, alarm settings, and so on. Item Power Saver Time Audio Tones Fault Time-Out Time-Out Language Description Specifies the length of time, 5-60 minutes, that the printer is idle before going into Energy Saver mode. For details on setting the Power Saver Time, see Setting the Power Saver Time on page 23. Specifies whether an alarm sounds when one of the following printer errors or actions occurs. The alarms are set to Off by default. The volume cannot be adjusted. • Control Panel • Invalid Key • Machine Ready • Job Complete • Fault Tone • Alert Tone • Out of Paper • Low Toner Alert • Base Tone Specifies the amount of time before the printer automatically deletes a print job when there has been a job error. Set the default timeout, up to 60 seconds, in one-second increments. Automatically cancels a print job when it goes beyond a specified time. Set the duration allowed for the print time. When the time expires, the print job is canceled. Duration can be set for up to 30 minutes in one-minute increments. Specifies the language used in the control panel menus and in printed Information Pages. Phaser 6500 Color Laser Printer 95 User Guide
![](/manual_guide/products/xerox-6500vn-user-guide-df320b7/95.png)