ZyXEL MAX-306 User Guide - Page 101
Advanced, Table 31
View all ZyXEL MAX-306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Chapter 7 The WAN Configuration Screens 7.5 Advanced Click ADVANCED > WAN Configuration > Advanced to configure your DNS server, RIP, Multicast and Windows Networking settings. Figure 40 ADVANCED > WAN Configuration > Advanced The following table describes the labels in this screen. Table 31 ADVANCED > WAN Configuration > Advanced LABEL DESCRIPTION DNS Servers First, Second and Third DNS Server Select Obtained from ISP if your ISP dynamically assigns DNS server information (and the WiMAX Device's WAN IP address). Use the drop-down list box to select a DNS server IP address that the ISP assigns in the field to the right. Select UserDefined if you have the IP address of a DNS server. Enter the DNS server's IP address in the field to the right. If you chose UserDefined, but leave the IP address set to 0.0.0.0, UserDefined changes to None after you click Apply. If you set a second choice to UserDefined, and enter the same IP address, the second UserDefined changes to None after you click Apply. Select None if you do not want to configure DNS servers. You must have another DHCP server on your LAN, or else the computers must have their DNS server addresses manually configured. If you do not configure a DNS server, you must know the IP address of a computer in order to access it. User's Guide 101