ZyXEL MAX-306 User Guide - Page 68
Before You Begin, 5.2 Set IP Address
View all ZyXEL MAX-306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Chapter 5 The Setup Screens you entered. You do not need to change the computer subnet mask unless you are instructed to do so. Daytime A network protocol used by devices for debugging and time measurement. A computer can use this protocol to set its internal clock but only if it knows in which order the year, month, and day are returned by the server. Not all servers use the same format. Time A network protocol for retrieving the current time from a server. The computer issuing the command compares the time on its clock to the information returned by the server, adjusts itself automatically for time zone differences, then calculates the difference and corrects itself if there has been any temporal drift. NTP NTP stands for Network Time Protocol. It is employed by devices connected to the Internet in order to obtain a precise time setting from an official time server. These time servers are accurate to within 200 microseconds. 5.1.3 Before You Begin • Make sure that you have made all the appropriate hardware connections to the WiMAX Device, as described in the Quick Start Guide. • Make sure that you have logged in to the web configurator at least one time and changed your password from the default, as described in the Quick Start Guide. 5.2 Set IP Address Click the SETUP icon in the navigation bar to set up the WiMAX Device's IP address and subnet mask. This screen displays this screen by default. If you are in any other sub-screen you can simply choose Set IP Address from the navigation menu on the left to open it again. Figure 21 SETUP > Set IP Address 68 User's Guide