ZyXEL MAX-306 User Guide - Page 34
WiMAX Device Hardware, 1.2.1 LEDs
View all ZyXEL MAX-306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 1 Getting Started 1.2 WiMAX Device Hardware Follow the instructions in the Quick Start Guide to make hardware connections. 1.2.1 LEDs The following figure shows the LEDs (lights) on the WiMAX Device. Figure 6 The WiMAX Device's LEDs The following table describes your WiMAX Device's LEDs (from right to left). Table 2 The WiMAX Device LED STATE PWR Off Red LAN 1~4 VoIP 1~2 Solid Green Blinking Green Off Green Blinking Green Off Green Blinking Green Orange Blinking Orange DESCRIPTION The WiMAX Device is not receiving power. The WiMAX Device is receiving power but has been unable to start up correctly or is not receiving enough power. See the Troubleshooting section for more information. The WiMAX Device is receiving power and functioning correctly. The WiMAX Device is performing a self-test. The LAN is not connected. The WiMAX Device has a successful Local Area Network (Ethernet) connection. The WiMAX Device is the process of transmitting and receiving data. No SIP account is registered, or the WiMAX Device is not receiving power. A SIP account is registered. A SIP account is registered, and the phone attached to the LINE port is in use (off the hook). A SIP account is registered and has a voice message on the SIP server. A SIP account is registered and has a voice message on the SIP server, and the phone attached to the LINE port is in use (off the hook). 34 User's Guide