ZyXEL MAX-306 User Guide - Page 83
Other Settings
View all ZyXEL MAX-306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Chapter 6 The LAN Configuration Screens Table 24 Management > Static Route > IP Static Route > Edit (continued) LABEL DESCRIPTION Apply Click to save your changes. Cancel Click to return to the previous screen without saving your changes. 6.6 Other Settings Click ADVANCED > LAN Configuration > Other Settings to set the RIP and Multicast options. Figure 29 ADVANCED > LAN Configuration > Advanced The following table describes the labels in this screen. Table 25 ADVANCED > LAN Configuration > Other Settings LABEL DESCRIPTION RIP & Multicast Setup RIP Direction Use this field to control how much routing information the WiMAX Device sends and receives on the subnet. RIP Version • None - The WiMAX Device does not send or receive routing information on the subnet. • Both - The WiMAX Device sends and receives routing information on the subnet. • In Only - The WiMAX Device only receives routing information on the subnet. • Out Only - The WiMAX Device only sends routing information on the subnet. Select which version of RIP the WiMAX Device uses when it sends or receives information on the subnet. • RIP-1 - The WiMAX Device uses RIPv1 to exchange routing information. • RIP-2B - The WiMAX Device broadcasts RIPv2 to exchange routing information. • RIP-2M - The WiMAX Device multicasts RIPv2 to exchange routing information. User's Guide 83