ZyXEL MAX-306 User Guide - Page 120
Customer Interface Setup, Table 40
View all ZyXEL MAX-306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Chapter 9 The VPN Transport Screens 9.3.4 Customer Interface Setup Click the Edit icon in the ADVANCED > VPN Transport > Customer Interface screen to open the Customer Interface Setup. Customer interfaces map traffic onto specific Ethernet pseudowires for transport over the WiMAX network. There is also a default customer interface for routing traffic that does not possess a VLAN tag. Figure 52 ADVANCED > VPN Transport > Customer Interface Setup The following table describes the labels in this screen. Table 40 ADVANCED > VPN Transport > Customer Interface Setup LABEL DESCRIPTION Active Select to make this customer interface active. Deselect it to make the customer interface inactive. Customer Interface Type A customer interface can be tagged (controlling traffic that has a specific VLAN ID) or untagged (controlling traffic without a specific VLAN ID). There can be only one untagged interface. VLAN ID Enter the Virtual Local Area Network Identifier number (1 ~ 4094) for this interface. This VLAN ID must not be used by any other customer interface. Mode Associated Ethernet Pseudowire For the untagged interface, -1 displays. This displays Bridging or Routing. A tagged interface can operate in bridging mode only. Select the Ethernet pseudowire this interface should use for communications over the WiMAX network. You should configure the pseudowire (in the ADVANCED > VPN Transport > Ethernet Pseudowire screen) before you select it. 120 User's Guide