ZyXEL MAX-306 User Guide - Page 140
Firmware, Table 52
View all ZyXEL MAX-306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Chapter 11 The System Configuration Screens Table 52 ADVANCED > System Configuration > Dynamic DNS (continued) LABEL DESCRIPTION Enable offline option This field is available when CustomDNS is selected in the DDNS Type field. Select this if your Dynamic DNS service provider redirects traffic to a URL that you can specify while you are off line. Check with your Dynamic DNS service provider. IP Address Update Policy Use WAN IP Address Select this if you want the WiMAX Device to update the domain name with the WAN port's IP address. Dynamic DNS server auto detect IP address Select this if you want the DDNS server to update the IP address of the host name(s) automatically. Select this option when there are one or more NAT routers between the WiMAX Device and the DDNS server. Note: The DDNS server may not be able to detect the proper IP address if there is an HTTP proxy server between the WiMAX Device and the DDNS server. Use specified IP Select this if you want to use the specified IP address with the host address name(s). Then, specify the IP address. Use this option if you have a static IP address. Apply Click to save your changes. Reset Click to restore your previously saved settings. 11.4 Firmware Click ADVANCED > System Configuration > Firmware to upload new firmware to the WiMAX Device. Firmware files usually use the system model name with a "*.bin" extension, such as "WiMAX Device.bin". The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will reboot. Contact your service provider for information on available firmware upgrades. Note: Only use firmware for your WiMAX Device's specific model. Figure 66 ADVANCED > System Configuration > Firmware 140 User's Guide