ZyXEL MAX-306 User Guide - Page 168
Advanced Analog Phone Setup, Table 62
View all ZyXEL MAX-306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Chapter 13 The Phone Screens 13.2.1 Advanced Analog Phone Setup Click the Advanced button in VOICE > Phone > Analog Phone to edit advanced settings for each phone port. Figure 78 VOICE > Phone > Analog Phone > Advanced The following table describes the labels in this screen. Table 62 VOICE > Phone > Analog Phone > Advanced LABEL DESCRIPTION Voice Volume Control Speaking Volume Enter the loudness that the WiMAX Device uses for speech that it sends to the peer device. -1 is the quietest, and 1 is the loudest. Listening Volume Enter the loudness that the WiMAX Device uses for speech that it receives from the peer device. -1 is the quietest, and 1 is the loudest. Echo Cancellation G.168 Active Select this if you want to eliminate the echo caused by the sound of your voice reverberating in the telephone receiver while you talk. Dialing Interval Select Dialing Interval Enter the number of seconds the WiMAX Device should wait after you Select stop dialing numbers before it makes the phone call. The value depends on how quickly you dial phone numbers. VAD Support If you select Active Immediate Dial in VOICE > Phone > Common, you can press the pound key (#) to tell the WiMAX Device to make the phone call immediately, regardless of this setting. Select this if the WiMAX Device should stop transmitting when you are not speaking. This reduces the bandwidth the WiMAX Device uses. Note: The G.711 codec does not support this feature. 168 User's Guide