ZyXEL MAX-306 User Guide - Page 95
WiMAX Configuration
View all ZyXEL MAX-306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Chapter 7 The WAN Configuration Screens Table 26 ADVANCED > WAN Configuration > Internet Connection > ISP Parameters for Internet Access (continued) LABEL DESCRIPTION Auth Mode Select the authentication mode from the drop-down list box. This field is not available in all WiMAX Devices. Check with your service provider for details. The WiMAX Device supports the following authentication modes: • User Only • Device Only with Cert • Certs and User Authentication Certificate This is the security certificate the WiMAX Device uses to authenticate the AAA server. Use the TOOLS > > Trusted CAs screen to import certificates to the WiMAX Device. WAN IP Address Assignment Get automatically from ISP (Default) Select this if you have a dynamic IP address. A dynamic IP address is not fixed; the ISP assigns you a different one each time you connect to the Internet. Use Fixed IP Address A static IP address is a fixed IP that your ISP gives you. IP Address Enter your ISP-assigned IP Address here. IP Subnet Mask Enter a subnet mask in dotted decimal notation. Gateway IP Address Apply Reset Refer to the appendices to calculate a subnet mask if you are implementing subnetting. Specify a gateway IP address (supplied by your ISP). Click to save your changes. Click to restore your previously saved settings. 7.3 WiMAX Configuration Click ADVANCED > WAN Configuration > WiMAX Configuration to set up the frequencies used by your WiMAX Device. In a WiMAX network, a mobile or subscriber station must use a radio frequency supported by the base station to communicate. When the WiMAX Device looks for a connection to a base station, it can search a range of frequencies. User's Guide 95