ZyXEL MAX-306 User Guide - Page 129
Port Forwarding Rule Setup, Table 48
View all ZyXEL MAX-306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Chapter 10 The NAT Configuration Screens 10.3.2 Port Forwarding Rule Setup Click a port forwarding rule's Edit icon in the ADVANCED > NAT Configuration > Port Forwarding screen to activate, deactivate, or edit it. Figure 60 ADVANCED > NAT Configuration > Port Forwarding > Rule Setup The following table describes the labels in this screen. Table 48 ADVANCED > NAT Configuration > Port Forwarding > Rule Setup LABEL DESCRIPTION Active Select this to enable this rule. Clear this to disable this rule. Service Name Enter a name to identify this rule. You can use 1 - 31 printable ASCII characters, or you can leave this field blank. It does not have to be a unique name. Start Port End Port Enter the port number or range of port numbers you want to forward to the specified server. To forward one port number, enter the port number in the Start Port and End Port fields. To forward a range of ports, Server IP Address Apply Cancel • enter the port number at the beginning of the range in the Start Port field • enter the port number at the end of the range in the End Port field. Enter the IP address of the server to which to forward packets for the selected port number(s). This server is usually on the LAN. Click to save your changes. Click to return to the previous screen without saving your changes. User's Guide 129