ZyXEL P-794H User Guide - Page 34
Set Up the CO, SHDSL > SHDSL Configuration, Unit ID, EFM_4-pair, Wire Mode, MinLineRate
![]() |
View all ZyXEL P-794H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 3 Tutorials address of the CPE is 192.168.1.3 and it provides an IP of 192.168.1.4 to the computer on its LAN. 192.168.1.3 CPE 5696/1920 Kpbs 192.168.1.1 CO 192.168.1.4 192.168.1.2 To set up the point-to-point connection between CO and CPE, you need to: 1 Set Up the CO. 2 Set Up the CPE. 3 Connect the P-794Hs. 3.2.1 Set Up the CO 1 Log in to the P-794H of the head-quarter that you want to configure as the CO. 2 Click SHDSL > SHDSL Configuration and select CO in the Unit ID field. 3 Select EFM_4-pair as the Wire Mode. 4 Enter 19200 bps in the MinLineRate field and 5696000 in the MaxLineRate field. 34 P-794H User's Guide
![](/manual_guide/products/zyxel-p794h-user-guide-bbafe41/34.png)
Chapter 3 Tutorials
P-794H User’s Guide
34
address of the CPE is 192.168.1.3 and it provides an IP of 192.168.1.4 to the
computer on its LAN.
To set up the point-to-point connection between
CO
and
CPE
, you need to:
1
Set Up the CO
.
2
Set Up the CPE
.
3
Connect the P-794Hs
.
3.2.1
Set Up the CO
1
Log in to the P-794H of the head-quarter that you want to configure as the
CO
.
2
Click
SHDSL > SHDSL Configuration
and select
CO
in the
Unit ID
field.
3
Select
EFM_4-pair
as the
Wire Mode
.
4
Enter
19200
bps in the
MinLineRate
field and
5696000
in the
MaxLineRate
field.
5696/1920 Kpbs
CPE
CO
192.168.1.1
192.168.1.3
192.168.1.4
192.168.1.2