ZyXEL P-870MH-C1 User Guide - Page 124
Table 29, Wireless LAN > General: WPA2-PSK
View all ZyXEL P-870MH-C1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Chapter 7 Wireless LAN The following table describes the wireless LAN security labels in this screen. Table 29 Wireless LAN > General: WPA(2)-PSK LABEL DESCRIPTION Security Mode Choose WPA-PSK or WPA2-PSK from the drop-down list box. Active Compatible This field is only available for WPA2-PSK. Select this if you want the Device to support WPA-PSK and WPA2-PSK simultaneously. Encryption Select the encryption type (AES or TKIP+AES) for data encryption. Select AES if your wireless clients can all use AES. Select TKIP+AES to allow the wireless clients to use either TKIP or AES. Pre-Shared Key The encryption mechanisms used for WPA(2) and WPA(2)-PSK are the same. The only difference between the two is that WPA(2)-PSK uses a simple common password, instead of user-specific credentials. Group Key Update Timer Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including spaces and symbols). The Group Key Update Timer is the rate at which the AP (if using WPA(2)-PSK key management) or RADIUS server (if using WPA(2) key management) sends a new group key out to all clients. The rekeying process is the WPA(2) equivalent of automatically changing the WEP key for an AP and all stations in a WLAN on a periodic basis. Setting of the Group Key Update Timer is also supported in WPA(2)PSK mode. The Device default is 1800 seconds (30 minutes). 124 P-870HN-5xb User's Guide