ZyXEL P-870MH-C1 User Guide - Page 125
WPA(2) Authentication, Table 30
View all ZyXEL P-870MH-C1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Chapter 7 Wireless LAN 7.4.4 WPA(2) Authentication Use this screen to configure and enable WPA or WPA2 authentication; click the Wireless LAN link under Network to display the General screen. Select WPA or WPA2 from the Security Mode list. Figure 56 Wireless LAN > General: WPA(2) The following table describes the wireless LAN security labels in this screen. Table 30 Wireless LAN > General: WPA(2) LABEL DESCRIPTION Security Mode Choose WPA or WPA2 from the drop-down list box. Active Compatible This field is only available for WPA2. Select this if you want the Device to support WPA and WPA2 simultaneously. Encryption Select the encryption type (AES or TKIP+AES) for data encryption. Select AES if your wireless clients can all use AES. Select TKIP+AES to allow the wireless clients to use either TKIP or AES. WPA2 Preauthentication This field is available only when you select WPA2. Pre-authentication enables fast roaming by allowing the wireless client (already connecting to an AP) to perform IEEE 802.1x authentication with another AP before connecting to it. Select Enabled to turn on preauthentication in WAP2. Otherwise, select Disabled. P-870HN-5xb User's Guide 125