ZyXEL P-870MH-C1 User Guide - Page 77
Layer 2 Interface Configuration, Table 11
View all ZyXEL P-870MH-C1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Chapter 5 WAN Setup Table 11 Layer 2 Interface (continued) LABEL DESCRIPTION Remove Click the Remove button to delete this interface from the Device. A window displays asking you to confirm that you want to delete the interface. AnnexM Enabled You cannot remove the layer-2 interface when a WAN service is associated with it. This option is available for an ATM (ADSL) interface. Select this to use double upstream mode to increase the maximum upstream transfer rate. Add Apply This option is only available on the P-870HN-51b. Click this button to create a new layer-2 interface. This button is available for an ATM (ADSL) interface. Click Apply to save your changes back to the Device. 5.5.1 Layer 2 Interface Configuration Click the Add button in the Layer 2 Interface screen to open the following screen. Use this screen to create a new layer-2 interface. At the time of writing, you can configure only one PTM interface on the Device. You can have multiple ATM layer-2 interfaces using different VPI and/or VCI values. The screen varies depending on the interface type you select. Figure 31 DSL ATM Interface Configuration P-870HN-5xb User's Guide 77