ZyXEL P-870MH-C1 User Guide - Page 71
Client List, Table 10
View all ZyXEL P-870MH-C1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Chapter 4 Status Screens 4.1.6 Client List DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain TCP/IP configuration at start-up from a server. You can configure the Device as a DHCP server or disable it. When configured as a server, the Device provides the TCP/IP configuration for the clients. If DHCP service is disabled, you must have another DHCP server on your LAN, or else the computer must be manually configured. Click Status > Client List to open the following screen. The read-only DHCP table shows current DHCP client information (including IP Address, Host Name and MAC Address) of all network clients using the Device's DHCP server. Figure 26 Status > Client List The following table describes the labels in this screen. Table 10 Status > Client List LABEL DESCRIPTION Host Name This indicates the computer host name. MAC Address Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. IP Address This indicates the MAC address of the client computer. This indicates the IP address assigned to this client computer. P-870HN-5xb User's Guide 71