Brother International MFC-9200C Users Manual - English - Page 213
Error Messages
View all Brother International MFC-9200C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
ERROR MESSAGES ERROR MESSAGE CAUSE ACTION NOT REGISTERED NO FILE PLS OPEN COVER PRINTER JAM SET CARTRIDGES WARMING UP You tried to access a One Touch or Speed Dial number that is not programmed. The media card in the media drive does not contain a .JPG file, or the DPOF print file on the media card selects a .JPG image that is not on the card. A page, piece of paper or paper clip, etc. may be jammed inside the MFC. The paper is jammed in the MFC. An ink cartridge is not installed properly. The print head detects low temperature. Set up the One Touch or Speed Dial number. See page 7-1. See PhotoCapture Center™ Requirements, page 12-9. Press the Scanner Cover Release Button and lift the scanner cover. If you see any jammed paper or other item, gently pull it out, then close the scanner cover. If the error message remains, open and close the scanner cover again. If the MFC cannot reset itself and return to the date and time prompt, it will display MACHINE ERROR XX. Please call Brother Customer Service and tell them the Machine Error number, at: USA: 1-800-284-4329 From within Canada: 1-800-853-6660 From within Montreal: 1-514-685-6464 See page 23-4. Re-install the ink, seating it properly. See page 23-16. Wait until the MFC warms up. T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E 23 - 3