Brother International MFC-9200C Users Manual - English - Page 58

Advanced Receiving Operations Operation from Extension Telephone If you answer a fax call on an extension phone or on an external phone in the EXT. jack, you can make your MFC take over by using the Fax Receive Code. When you press the Fax Receive Code 5 1, the MFC starts to receive a fax. (See Easy Receive, page 5-2.) If you answer a call at an extension or external phone, and no one is on the line, assume you're receiving a fax. At an extension phone, press 5 1, wait for fax receiving tones (chirps), then hang up. At an external phone, press 5 1 and wait for the phone to be disconnected (the LCD shows RECEIVE) before you hang up. (Your caller will have to press Start to send the fax.) Changing the Fax Receive Code The preset Fax Receive Code ( 5 1) might not work with some telephone systems. Note If you are always disconnected when accessing your external TAD remotely, try changing the Fax Receive Code from 5 1 to # # #. 1 Press Function, 1, 2, 3. 2 Press or to select ON (or OFF) and press Set. REMOTE ACT.:ON? 3 If you want to, enter a new Fax Receive Code, then press Set. FAX RECEIVE:*51 4 Press Stop to exit. Printing a Fax in Memory If you have Fax Storage ON for remote retrieval, you can still print a fax in the memory when you are at your MFC. (See Setting Fax Storage, page 8-2.) 1 Press Function, 1, 7, 4. 2 Press Start. 3 After printing is finished, press Stop to exit. 5-4 SETUP RECEIVE