Brother International MFC-9200C Users Manual - English - Page 44
Multi-Line Connections (PBX), If you are installing the MFC to work with a PBX: - troubleshooting
View all Brother International MFC-9200C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Multi-Line Connections (PBX) Most offices use a central telephone system. While it is often relatively simple to connect the machine to a key system or a PBX (Private Branch Exchange), we suggest that you contact the company that installed your telephone system and ask them to connect the MFC for you. It is advisable to have a separate line for the MFC. You can then leave the MFC in FAX mode to receive faxes any time of day or night. If the MFC is to be connected to a multi-line system, ask your installer to connect the unit to the last line on the system. This prevents the unit from being activated each time a telephone call is received. As with all fax units, this machine must be connected to a two wire system. If your line has more than two wires, proper connection of the MFC cannot be made. If you are installing the MFC to work with a PBX: 1 It is not guaranteed that the unit will operate correctly under all circumstances with a PBX. Any cases of difficulty should be reported first to the company that handles your PBX. 2 If all incoming calls will be answered by a switchboard operator, it is recommended that the Receive Mode be set to MANUAL. All incoming calls should initially be regarded as telephone calls. 3 The MFC may be used with either pulse or tone dialing telephone service (For Canada only). Custom Features on a Single Line To learn how custom features may affect your faxing operations, see Chapter 23, Troubleshooting and Routine Maintenance. 2 - 16 A S S E M B L Y A N D C O N N E C T I O N S