Brother International MFC-9200C Users Manual - English - Page 46

Alternating Displays When you see alternating displays, the LCD sometimes alternates between the currently selected option, and a help message giving brief instructions about how to proceed. The display you'll probably see most often is shown below. It appears when you place an original in the ADF to tell you that you can dial a number and send a fax, or you can make a copy. FAX: NO. & START COPY: PRESS COPY Function Selection Table You can probably perform most of these programming settings without the Owner's Manual. To help you understand the function selections, options and settings that are found in the MFC programs, use the Function Selection Table below: 1. Fax Functions 1. INITIAL SETUP Function 1. DATE/TIME 2. STATION ID 3. BEEPER 4. SPEAKER VOLUME 5. RING VOLUME 6. AUTO DAYLIGHT 7. TONE/PULSE (For Canada only) 8. LOCAL LANGUAGE (For Canada only) Description Enter date and time for the LCD display and heading on fax transmissions. Program your name, fax number and telephone number to appear on each transmitted page. Adjusts volume level of beeper. Adjusts the volume of the one-way speaker. Adjusts volume of ringer. Changes for Daylight Savings Time automatically. Selects dialing mode. Allows you to change the LCD Language to French. Factory Setting 2001 1/1 00:00 - LOW LOW LOW OFF TONE ENGLISH Page 4-1 4-1 4-3 4-4 4-4 4-4 4-3 See French Manual 3-2 ON-SCREEN PROGRAMMING