Brother International MFC-9200C Users Manual - English - Page 66

Real Time Transmission When you are sending a fax, the MFC will scan originals into memory before sending. Then, as soon as the phone line is free, the MFC will start dialing and sending the fax. If memory becomes full, the MFC will send the document in real time, even if REAL TIME TX is set to OFF. Sometimes you may want to send an important document immediately, without waiting for memory transmission. You can set REAL TIME TX to ON. 1 Place the original face up in the ADF, or face down on the scanner glass. 2 Press Function, 1, 3, 8. 8.REAL TIME TX 3 To change the default setting, press or REALTIME TX:ON? to select ON (or OFF) and press Set. Go to Step 5-OR- For the next fax transmission only, press or to select NEXT FAX ONLY and press Set. 4 For the next fax only, press or to select ON (or OFF) and press Set. 5 Press 1 if you want to select additional settings. The LCD returns to the SETUP SEND menu-OR-Press 2 if you are finished choosing settings and go to Step 6. 6 Enter fax number and press Start. Color faxes will be sent in real time even if REALTIME TX is set to OFF. Checking the Job Status Check which jobs are still waiting in memory to be sent. (If no jobs are waiting, the LCD shows NO JOB WAITING.) (See Canceling a job in Memory below.) 1 Press Function, 1, 4. 2 If you have multiple jobs waiting, press or to scroll through the list. 3 Press Stop to exit. 6-6 SETUP SEND