Brother International MFC-9200C Users Manual - English - Page 51

4 Initial Setup 4 Getting Started Setting Date and Time Your MFC displays the date and time, and prints it on every fax you send. In the event of a power failure, you may have to reset the date and time. All other settings remain unaffected. 1 Press Function, 1, 1, 1. YEAR:XX 2 Enter the last two digits of the year and press Set. MONTH:XX 3 Enter two digits for the month and press Set. (For example, enter 09 for September, or 10 for October.) DAY:XX 4 Enter two digits for the day and press Set. (For example, 06.) TIME:XX:XX 5 Enter the time in 24-hour format and press Set. (For example, enter 15:25 for 3:25 PM.) 6 Press Stop. The LCD now shows the date and time you set, and displays it whenever the MFC is in Standby mode. Setting Station ID You can store your name, fax number, and telephone number to be printed on all fax pages that you send. (See Composing Electronic Cover Page, page 6-7.) 1 Press Function, 1, 1, 2. 2 Enter your fax number (up to 20 digits) and press Set. (You must enter a fax number to proceed.) FAX: TEL: 3 Enter your telephone number (up to 20 digits) and press Set. If your telephone number and fax number are the same, enter the same number again. (This number appears on Cover pages.) 4 Use the dial pad to enter your name (up to 20 characters), and press Set. (See Entering Text, next page.) NAME: 5 Press Stop. The LCD returns to the date and time. INITIAL SETUP 4-1