Canon BJ-30 User Guide - Page 105
Operational Problems, Problem, Cause, Solution
View all Canon BJ-30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Problem Blinking F and other number Cause Other service call errors Solution If you see a message consisting of the letter F in combination with a number (such as F1 or F2) and the printer beeps for about five seconds, turn the printer off and reconnect your AC adapter. If this does not cause the printer to stop beeping, make a note of the message number and call your local Canon authorized dealer. Operational Problems If you are having problems with the printer, check the problems and solutions listed in the following table. Problem No power reaching printer Cause The printer may not be turned on. The printer may not be securely plugged into the AC adapter. The AC outlet may not be supplying power. Solution Hold down the POWER printer button until the printer beeps. Make sure the AC adapter is plugged securely into the printer and into a wall outlet. If the AC adapter is connected to a power strip, make sure the power strip is connected to an outlet and turned on. Check the AC outlet. Troubleshooting Chapter 7 Troubleshooting 97