Canon BJ-30 User Guide - Page 134

When you set this FUNCTION to OFF, memory reserved for the input and download buffers is used exclusively as an input buffer. No download buffer is maintained under these conditions. Set this FUNCTION to ON when you want some memory to be used as a download buffer. Of the total amount of memory reserved for the input and download buffers, 3 KB is allocated for an input buffer and the remainder is used as a download buffer. FUNCTION 10: Automatic line feed (LF) Use this FUNCTION to determine the type of carriage return. When this FUNCTION is OFF, the printer performs a normal carriage return (CR only). When this FUNCTION is ON, the printer follows each carriage return with a line feed (CR + LF). FUNCTION 11: Automatic carriage return (CR) When this setting is OFF, the printer performs a normal line feed (LF only). Set this FUNCTION to ON if you want the printer to perform a carriage return after each line feed (LF + CR). FUNCTION 12: Alternate graphics mode (AGM) Set this FUNCTION to ON to enable Alternate Graphics Mode (AGM). In this mode, the printer accepts high-resolution, 24-dot, all-pointsaddressable (APA) graphics commands similar to those used with conventional 24-pin printers. FUNCTION 14: Character set When this setting is OFF, the printer uses Character Set 1. When this setting is ON, the printer uses Character Set 2. FUNCTION 15, 16, 17, 18: Code page These FUNCTIONs allow you to select the following code page tables. FUNCTION Settings Code page/Character set 15 16 17 18 437 USA, English OFF OFF OFF OFF 850 Multilingual (Latin I) OFF OFF OFF ON 863 French Canadian OFF OFF ON OFF 865 Norwegian OFF OFF ON ON 860 Portuguese OFF ON OFF OFF 857 Turkish OFF ON OFF ON 855 Cyrillic OFF ON ON OFF 852 Slavic (Latin II) OFF ON ON ON 864 Arabic ON OFF OFF OFF 869 Greek ON OFF OFF ON 126 Customizing the Printer Chapter 8