Canon PIXMA MG6320 User Guide - Page 258

Disc Label: -0.2 inch (-5.0 mm) to +0.2 inch (+5.0 mm) Vertical You can adjust the print position in the vertical direction. Set a positive value to move upward or set a negative value to move downward. Horizontal You can adjust the print position in the horizontal direction. Set a positive value to move left or set a negative value to move right. Advanced Settings Image Correction Select Enable Auto Photo Fix to apply corrections automatically; select No correction if you do not want to do so. Select Enable Auto Photo Fix to set the following. Enable Red-Eye Correction Select this checkbox to correct red eyes caused by a camera flash. Prioritize Exif info Select this checkbox to apply corrections primarily based on the settings made at the time of shooting. Important The color tone may change when you print a document image with Enable Auto Photo Fix selected. In that case, select No correction. Print Quality You can select the print quality suitable for the data to be printed. You can select Auto, High, Standard, Fast, or Custom. Select Custom to display a slider with which you can set the print quality in five levels. Move the slider to the right to improve the quality and left to increase the print speed. Duplex Printing Setting This appears when you select a printer and media type that support duplex printing. Select this checkbox to print on both sides of the paper. Print with auto duplex printing For printers that support automatic duplex printing, Print with auto duplex printing appears when you select the Duplex Printing Setting checkbox. Select this checkbox to turn over the paper to the back or front side automatically. Print Starts printing with the specified settings.