Canon PIXMA MX320 On-Screen Manual - Page 504

Scanning Multiple Documents from the ADF (Auto Document Feeder) in Ad... Page 504 of 817 pages Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings Using ScanGear (Scanner Driver) > Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode In Advanced Mode, you can specify the image brightness, color tone, etc. and scan multiple documents placed on the ADF (Auto Document Feeder) at one time. When scanning from the ADF (Auto Document Feeder), documents are scanned without preview. 1. Place the documents on the ADF (Auto Document Feeder), then start ScanGear (scanner driver). Placing Documents (ADF (Auto Document Feeder)) Starting ScanGear (Scanner Driver) 2. Click Advanced Mode and select Document (ADF Simplex) for Select Source. Note Settings are not retained when you switch between modes. 3. Set Paper Size, Original Orientation and Color Mode. Input Settings 4. Set Output Settings. Output Settings 5. Make image corrections and color adjustments as required. Note See the corresponding sections below for details on Image Settings and the Color Adjustment Buttons. Image Settings Color Adjustment Buttons