Canon PIXMA MX320 On-Screen Manual - Page 745

Message Appears on the Computer Screen Page 745 of 817 pages While the Power lamp is flashing green, the machine is initializing. Wait until the Power lamp stops flashing and remains lit green. Check 2: Make sure that the USB cable is securely plugged in to the machine and the computer. If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to the computer, and try printing again. If printing starts normally, there is a problem with the relay device. Consult the reseller of the relay device for details. There could also be a problem with the USB cable. Replace the USB cable and try printing again. Check 3: Make sure that your machine's name is selected in the Print dialog box. Opening the Page Setup and Print Dialog Box (Macintosh) Error Number: 1700 Is Displayed Check: See Contact service center in An Error Message Is Displayed on the LCD and take the appropriate action. Ink Info Number: 1688 Is Displayed Check: See Check inkU163 in An Error Message Is Displayed on the LCD and take the appropriate action. Ink Info Number: 1686 Is Displayed Check: See Check inkU162 in An Error Message Is Displayed on the LCD and take the appropriate action. Error Number: 2001 Is Displayed Check: See Incompatible device in An Error Message Is Displayed on the LCD and take the appropriate action. Error Number: 2002 Is Displayed Check: See Unsupported USB hub in An Error Message Is Displayed on the LCD and take the appropriate action. Other Error Messages Check: If an error message is displayed outside the printer status monitor, check the following: "Could not spool successfully due to insufficient disk space" Delete any unnecessary files to increase the amount of free space on the disk. "Could not spool successfully due to insufficient memory" Quit other running applications to increase available memory. If you still cannot print, restart your computer and retry printing. "Printer driver could not be found" Uninstall the printer driver according to the procedure described in Uninstalling the MP Drivers, and then reinstall it. "Could not print Application name - File name" Try printing again once the current job is complete.