Cisco SRP521W-K9-G1 Administration Guide - Page 131
Provisioning Configuration Profile
View all Cisco SRP521W-K9-G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Configuring Voice Configuring Voice Settings 6 Provisioning Page Use the Provisioning page to configure various profiles and parameters. This page includes the following sections: • Configuration Profile • Firmware Upgrade • General Purpose Parameters Configuration Profile Voice > Provisioning > Configuration Profile Provision Enable Resync On Reset Resync Random Delay Controls all resync actions independently of firmware upgrade actions. Set to Yes to enable remote provisioning. The default is Yes. Triggers a resync after every reboot except for reboots caused by parameter updates and firmware upgrades. The default is Yes. The maximum value for a random time interval that the device waits before making its initial contact with the provisioning server. This delay is effective only on the initial configuration attempt following device power-on or reset. The delay is a pseudo-random number between zero and this value. This parameter is in units of 20 seconds; the default value of 2 represents 40 seconds. This feature is disabled when this parameter is set to zero. This feature can be used to prevent an overload of the provisioning server when a large number of devices power-on simultaneously. The default is 2 (40 seconds). Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 131