Cisco SRP521W-K9-G1 Administration Guide - Page 96

6 Configuring Voice Configuring Voice Services NOTE These are the minimum settings for most ITSP connections. Enter the account information as required by your ITSP. STEP 5 Click Submit to save your settings. The voice service will restart. STEP 6 To verify your progress, perform the following tasks: a. From the Voice navigation pane, click Info. Scroll down to the Line section of the page for the line you configured. Verify that the line is registered. b. Use an external phone to place an inbound call to the telephone number that was assigned by your ITSP. Assuming that you have left the default settings in place, the phone should ring and you can pick up the phone to get two-way audio. c. If the line is not registered, you may need to refresh the browser several times because it can take a few seconds for the registration to complete. Also verify that DNS is configured properly. 96 Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)