Cisco SRP521W-K9-G1 Administration Guide - Page 38
Access Point Name, Card Model
View all Cisco SRP521W-K9-G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Setting up the Interfaces of the Services Ready Platforms Setting up the WAN Interface 4 Field Description Card Status Displays the current modem connection status as initializing, connecting, connected, disconnecting, or disconnected. These messages might also appear: • Please set APN manually Appears when the SRP is unable to determine the APN from the operator in automatic mode. • Searching for service... • no SIM card • SIM locked • SIM busy • SIM ready • pin code needed • pin code error • Card is locked • Card is not activated • Card initialized error • error NOTE If Connect Mode is set to Manual, you can click a button to connect or disconnect your modem. Configure Mode The SRP automatically detects supported modems and presents a list of appropriate default configurations. If you need to override any of these settings (with the exception of the SIM PIN), select manual configuration mode. Card Model Data card model that is inserted into the USB drive. Unsupported cards are reported as unrecognized. Access Point Name (APN) Internet network to which the mobile device is connecting to. Enter the access point name provided by your mobile network service provider. Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 38