Cisco SRP521W-K9-G1 Administration Guide - Page 51

Setting up the Interfaces of the Services Ready Platforms Setting up the Wireless LAN 4 Basic Wireless Settings Field Description Standard Channel If you selected Wide-40MHz Channel or Standard -20MHz Channel for the Radio Band setting, then this setting will be available. Select the channel for Wireless-N, Wireless-G, and Wireless-B networking. If you selected Wide-40MHz Channel for the Radio Band setting, then the Standard Channel will be a secondary channel for Wireless-N. The default is channel 11. If radio band is selected automatically, the standard channel will also be chosen automatically. Wireless Table Wireless Network Name (SSID) Name of the network that clients use when connecting to the network. By default wireless network is named "cisco-data" and is connected to the default VLAN. To rename the default wireless network, enter a unique Wireless Network Name, which is case-sensitive and must not exceed 32 characters (use any of the characters on the keyboard). The second default wireless network has the default name "cisco-voice" and is bridged to the voice VLAN. To create a second wireless network, enter a unique Wireless Network Name in the SSID2 setting. To activate this network, select Enabled Network. NOTE Your ISP or ITSP may be responsible for controlling the SSID2 settings. Contact your ISP or ITSP for more information. SSID1/2/3/4 Network name shared among all devices in a wireless network. The SRP can support up to four wireless networks. By default, the first and second wireless networks are enabled, and you can enable two other wireless networks if needed. For each wireless network you need to configure the Wireless Network Name (SSID), Broadcast Network Name, and Enable Network option. Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 51