Cisco SRP521W-K9-G1 Administration Guide - Page 71
QoS, QoS Bandwidth Control, Configuring the Network, QoS Policy, CoS To Queue, DSCP To Queue
View all Cisco SRP521W-K9-G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Configuring the Network QoS 5 QoS This section describes how to configure Quality of Service (QoS) settings for the SRP. It includes the following sections: • QoS Bandwidth Control • QoS Policy • CoS To Queue • DSCP To Queue To access these pages click Network Setup > QoS from the Configuration Utility. QoS Bandwidth Control Use the QoS Bandwidth Control page to allow the SRP to rate limit upstream data transmissions to suit the broadband service. STEP 1 Click Network Setup > QoS > Bandwidth Control. The QoS Bandwidth Control window opens. STEP 2 Click Enabled next to the interface on which you want to enable bandwidth control. Uncheck the box to disable it. The default setting is Disabled. STEP 3 To configure available bandwidth for each physical interface, click the Edit (pencil) icon. The Bandwidth Shaping Control window opens. STEP 4 Specify the bandwidth shaping control values as defined in the Bandwidth Shaping Control Settings table. STEP 5 Click Submit to save your settings. Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 71