Cisco SRP521W-K9-G1 Administration Guide - Page 211

Using Services Ready Platform Diagnostics Traceroute Test 9 Traceroute Test Use the Traceroute page to view the route between the SRP and a destination. STEP 1 Click Diagnostics > Traceroute Test. The Traceroute Test window opens. STEP 2 Enter the IP or URL address to run the trace route on. STEP 3 Click Start to Traceroute to start the test. The results appear on the page and are refreshed every 5 seconds. STEP 4 Click Close to close the results and display the form. Detect Active LAN Clients Use the Detect Active LAN Clients page to perform a search on the active LAN clients on your SRP. STEP 1 Click Diagnostics > Detect Active LAN Client(s). The Detect Active LAN Client(s) window opens. STEP 2 Choose the LAN interface you want to detect from the down list. For example: VLAN1. STEP 3 Choose how long you want to perform this search (5, 10, or 15 seconds). STEP 4 Click Start to Search to start the test. A new window opens and displays the test results. Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 211