Cisco SRP521W-K9-G1 Administration Guide - Page 202

Administration Settings Time Setup 8 Local TFTP Settings Field Description File Enter the name of the remote file. Save As Enter the filename for the file you are saving. User Name Enter a user name to access the remote file User Password Enter a password to access the remote file. Timeout Specify the session timeout value (in seconds). This is the maximum time allowed for a connection session. The connection timeout for HTTP and FTP sessions is 3 seconds.The connection timeout for TFTP is 1 second. For HTTP and FTP, is a TCP reset response message will terminate a session. Retry Specify the number of sessions that will retry if a transient problem occurs in a session Status The status of the processing remote file. File List table Shows the name and size of the remote file. Time Setup Use the Time Setup page to set the time zone parameters for your network. You can configure the system time manually or configure it by using the Network Time Protocol (NTP) server. STEP 1 Click Administration > Time Setup. The Time Setup window opens. STEP 2 Specify the settings for your time zone. Time zone is usually referred to as the local time. STEP 3 To setup the system clock manually, select User Manual and enter the date and time zones. Enter the date format as "Year/Month/Day" and the time format as: "Hour:Min:Sec." STEP 4 To automatically set the time, configure the time zone settings as defined in the Time Setup Settings table. Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 202