Cisco SRP521W-K9-G1 Administration Guide - Page 83

Configuring the Network IGMP STEP 4 Click Submit to save your settings. 5 IGMP Field Status Source IP Address Destination Show DHCP Client Table Description To use this feature, select Enabled. To disable DMZ hosting, select Disabled. If you want any IP address to be the source, select Any IP Address. If you want to specify an IP address or range of IP addresses as the designated source, click the second radio button, and enter the IP address(es) in the fields provided. To specify the DMZ host by IP address, select IP Address and complete the IP address in the field provided. If you want to specify the DMZ host by MAC address, select MAC Address and enter the MAC address in the field provided. To retrieve this information, click the DHCP Client Table button. The DHCP Client Table lists computers and other devices that have been assigned IP addresses by the Router. The list can be sorted by Client Name, Interface, IP Address, MAC Address, and Expired Time (how much time is left for the current IP address). To select a DHCP client, click the Select button. To retrieve the most up-todate information. Use the IGMP page to configure settings for the Internet Group Management Protocol (IGMP) protocol. IGMP is a signaling protocol that supports IP multicasting for IPTV. For example, use IGMP if you have Internet Protocol Television (IPTV) with multiple setup boxes on the same local network that have different video streams running simultaneously. Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 83