Cisco SRP521W-K9-G1 Administration Guide - Page 138
Call Progress Tones, Voice > Regional > Call ProgressTones
View all Cisco SRP521W-K9-G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
6 Configuring Voice Configuring Voice Settings Example 1-Dial tone: 350@-19,440@-19;10(*/0/1+2) Number of Frequencies = 2 Frequency 1 = 350 Hz at -19 dBm Frequency 2 = 440 Hz at -19 dBm Number of Cadence Sections = 1 Cadence Section 1: Section Length = 10 s Number of Segments = 1 Segment 1: On=forever, with Frequencies 1 and 2 Total Tone Length = 10s Example 2-Stutter tone: 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2) Number of Frequencies = 2 Frequency 1 = 350 Hz at -19 dBm Frequency 2 = 440 Hz at -19 dBm Number of Cadence Sections = 2 Cadence Section 1: Section Length = 2s Number of Segments = 1 Segment 1: On=0.1s, Off=0.1s with Frequencies 1 and 2 Cadence Section 2: Section Length = 10s Number of Segments = 1 Segment 1: On=forever, with Frequencies 1 and 2 Total Tone Length = 12s Call Progress Tones Voice > Regional > Call ProgressTones Dial Tone Second Dial Tone Outside Dial Tone Prompts the user to enter a phone number. Reorder Tone is played automatically when Dial Tone or any of its alternatives times out. The default is 350@-19,440@-19;10(*/0/1+2). Alternative to the Dial Tone when the user dials a threeway call. The default is 420@-19,520@-19;10(*/0/1+2). Alternative to the Dial Tone. It prompts the user to enter an external phone number, as opposed to an internal extension. It is triggered by a, (comma) character encountered in the dial plan. The default is 420@-19;10(*/0/1). 138 Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)