Cisco SRP521W-K9-G1 Administration Guide - Page 185
IPSec Policy, Use the IPSec Policy to con a VPN IPSec Policy. The IPSec VPN policy
View all Cisco SRP521W-K9-G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Configuring VPN IPSec Policy 7 IKE Policy Settings Field Description Enable Dead Peer (DPD) Detection To enable DPD, select Enable. The default is disabled. NOTE DPD is not required for an IKE rule, but if enabled, helps to keep the connection alive during times when there is no traffic. DPD Interval Enter an interval for DPD. This packet is sent periodically in interval seconds during no data traffic. DPD Timeout Enter a timeout (in seconds) for Dead Peer Detection (DPD). Extended Authentication XAUTH Client Enable Enable if the VPN peer requires Extended Authentication credentials. The default setting is disabled. Username/ Password Enter the credentials that the SRP uses to connect with the remote peer. IPSec Policy Use the IPSec Policy page to configure a VPN IPSec Policy. The IPSec VPN policy contains the IPSec Security Association parameters, which define the connection type and key type. STEP 1 Click VPN > Site to Site IPSec VPN > IPSec Policy. The IPSec Policy window opens. From this page you can view the existing IPSec policies, edit an IPSec policy and add an IPSec policy. You can also view the details for each policy from the IPSec Details list. STEP 2 To add an IPSec policy, click Add Entry. The IPSec Policy window opens. STEP 3 To enable the new policy, select Enable. STEP 4 Choose a policy identification number from the drop-down list. STEP 5 In the Policy Name field, enter a unique name for the IPSec policy. Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 185