Cisco SRP521W-K9-G1 Administration Guide - Page 139

Configuring Voice Configuring Voice Settings 6 Prompt Tone Busy Tone Reorder Tone Off Hook WarningTone Ring Back Tone Ring Back 2 Tone Confirm Tone SIT1 Tone Prompts the user to enter a call forwarding phone number. The default is 520@-19,620@-19;10(*/0/1+2). Played when a 486 RSC is received for an outbound call. The default is 480@-19,620@-19;10(.5/.5/1+2). Played when an outbound call has failed, or after the far end hangs up during an established call. Reorder Tone is played automatically when Dial Tone or any of its alternatives times out. The default is 480@-19,620@-19;10(.25/.25/1+2). Played when the caller has not properly placed the handset on the cradle. Off Hook Warning Tone is played when the Reorder Tone times out. The default is 480@10,620@0;10(.125/.125/1+2). Played during an outbound call when the far end is ringing. The default is 440@-19,480@-19;*(2/4/1+2). Your SRP plays this ringback tone instead of Ring Back Tone if the called party replies with a SIP 182 response without SDP to its outbound INVITE request. The default value is the same as Ring Back Tone, except the cadence is 1s on and 1s off. The default is 440@-19,480@-19;*(1/1/1+2). Brief tone to notify the user that the last input value has been accepted. The default is 600@-16; 1(.25/.25/1). Alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. The default is 985@-16,1428@-16,1777@ 16;20(.380/0/ 1,.380/0/2,.380/0/3,0/4/0). Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 139