Cisco SRP521W-K9-G1 Administration Guide - Page 63

Configuring the Network Routing 5 Routing This section describes how to configure various types of routing on the SRP including: • Static Routes • RIP • Intervlan Routing To access these pages click Network Setup > Routing from the Configuration Utility. Static Routes Use the Static Routes page to configure static routes for network traffic. STEP 1 Click Network Setup > Routing > Static Routes. The Static Routes window opens. From this page you can view the current static routing list and details of the selected route, or add another route to the Static Routing List. STEP 2 To add a static route, click Add Entry. The Static Routing window for the new entry opens. STEP 3 Enter a name for the new route. STEP 4 Enter the destination IP address and subnet mask for the specified network or host to which want to assign a static route. STEP 5 Enter the IP address of the gateway that allows for contact between the SRP and the specified network or host. STEP 6 Choose the interface for this route. STEP 7 Click Submit to save your changes. Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 63