Cisco SRP521W-K9-G1 Administration Guide - Page 50

Setting up the Interfaces of the Services Ready Platforms Setting up the Wireless LAN 4 Basic Wireless Settings Field Description Network Mode Choose the wireless mode based on the type of devices in your network. NOTE The wireless access point is disabled by default to ensure network security. You must select an active network mode to enable it before configuring further. • If you have Wireless-N, Wireless-G, and Wireless-B devices in your network, select Mixed. • If you have only Wireless-G and Wireless-B devices in your network, select BG-Mixed. • If you have only Wireless-N devices, select Wireless-N Only. • If you have only Wireless-G devices, select Wireless-G Only. • If you have only Wireless-B devices, select Wireless-B Only. • If you don't want to use the integrated wireless access point, select Disabled. Radio Band Select the wireless bandwidth for your network. There are three options: Auto, Standard-20MHz Channel, and Wide40MHz Channel. The default is Standard-20MHz Channel. Wide channel band configuration is available for Wireless-N networks and clients only. If wide channel mode is selected for mixed networks, standard channel usage is still available for Wireless -B and -G clients. Wide Channel If you selected Wide-40MHz Channel for the Radio Band setting, then this setting will be available for your primary Wireless-N channel. Select any channel from the drop-down list. If radio band is selected automatically, the wide channel is also chosen automatically. Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 50