Cisco SRP521W-K9-G1 Administration Guide - Page 57

Setting up the Interfaces of the Services Ready Platforms Setting up the Wireless LAN 4 STEP 6 Select Save to MAC Address Filter List for any device you want to add to the list and click Add. To retrieve the most up-to-date information, click Refresh. To exit this page and return to the Wireless MAC Filter page, click Close. NOTE Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network radius. STEP 7 Click Submit to save your settings. Wireless MAC Filter Settings Field Description Wireless MAC Filter Select a SSID Choose the name of the wireless network that you want to configure. The default data SSID is cisco-data and the default voice SSID is cisco-voice. Enabled/Disabled To filter wireless users by MAC Address, either permitting or blocking access, select Enabled. The default is Disabled. Access Restriction Prevent Select this option to block wireless access from the clients that you specify in the MAC Address Table. This is the default setting. Permit Select this option to permit wireless access only from the clients that you specify in the MAC Address Table. Show Client List Click this button to display a list of computers and other devices that are connected to this wireless network. To add a listed client to the MAC Address Table, check the Save to MAC Address Filter List box and click Add. To hide the client list, click Hide Client List. MAC Address Table 01-32 Enter the MAC addresses of the devices whose wireless access you want to block or allow. Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 57