Cisco SRP521W-K9-G1 Administration Guide - Page 206
Factory Defaults, Firmware Upgrade
View all Cisco SRP521W-K9-G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
Administration Settings Factory Defaults 8 Factory Defaults Use the Factory Default page to set the SRP to the settings it was configured with when it was shipped from the factory. STEP 1 Click Administration > Factory Defaults. The Factory Defaults window opens. STEP 2 To restore the SRP to its factory defaults, select Yes. Any custom data (SRP) settings you have saved will be lost when the default settings are restored STEP 3 To restore the voice settings to the factory defaults, select Yes. Any custom voice settings you have saved will be lost when the default settings are restored STEP 4 Click Submit to save your settings. Firmware Upgrade Use the Firmware Upgrade to upgrade the firmware on the SRP. It is not necessary to upgrade unless you are experiencing problems with the device or if the new firmware has a feature that you want to use. Before upgrading the firmware, download the firmware upgrade file for the SRP at: www.cisco.com/go/srp500. Click the Download Software link to download the latest software. STEP 1 Click Administration > Firmware Upgrade. The Firmware Upgrade window opens. STEP 2 Click Browse and select the location of the upgrade file that you downloaded. STEP 3 Click the Upgrade button. ! CAUTION Upgrading the firmware may take several minutes. Until the process is complete, DO NOT turn off the power, press the hardware reset button, or click the Back button in your current browser. Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 206